Products
FOLLOW US
Basic parameters:
Dimensions: total length: 20CM, total width: 17CM, total height: 70.5-93CM, maximum load: 108KG, net weight: 0.6KG
The national standard GB/T 19545.4-2008 "Technical requirements and test methods for single-arm operation walking aids Part 4: Three-legged or multi-legged walking sticks" is used as the design and production implementation standard, and its structural characteristics are as follows:
2.1) Main frame: It is made of 6061F aluminum alloy material, the diameter of the tube is 19MM, the wall thickness is 1.2MM, and the surface treatment is anodized. The wing nut is used to fasten the design, and the teeth are not slippery.
2.2) Base: 6061F aluminum alloy material is used, the diameter of the tube is 22MM, the wall thickness is 2.0MM, and the surface is treated with anodizing. The base is welded and reinforced with solid aluminum bars, the chassis is more stable, and the safety performance is good.
2.3) Grip: Made of environmentally friendly PP+TPR material, high elasticity, soft touch, environmentally friendly, non-toxic, non-irritating odor, non-slip texture on the surface, not tired for a long time, and contains a steel column to avoid the risk of breakage.
2.4) Foot pads: Four-legged ground structure, equipped with rubber non-slip foot pads, good grounding performance, excellent stability, safety and reliability.
2.5) Performance: 10 levels of height can be adjusted, suitable for the crowd 1.55-1.75CM
1.4 Usage and precautions:
1.4.1 How to use:
Adjust the height of the crutches according to different heights. Under normal circumstances, the height of the crutches should be adjusted to the position of the wrist after the body is standing upright.
1.4.2 Matters needing attention:
Check all parts carefully before use. If any low-end wearing parts are found to be abnormal, please replace them in time. Before use, make sure that the adjustment key is adjusted in place, that is, you can use it only after you hear a "click". Do not place the product in a high temperature or low temperature environment, otherwise it will cause aging of the rubber parts and insufficient elasticity. This product should be placed in a dry, ventilated, stable, and non-corrosive room. Regularly check whether the product is in good condition every week.
When using, pay attention to the wires on the ground, the liquid on the floor, the slippery carpet, the stairs up and down, the gate at the door, the gap in the floor
1.5 Installation : free installation
Message
Products Recommended
